Tool Rack

by "Le bois d'Artegus"
  1. Projects
  2. Tool Rack

 

 


 


About the project

This tool rack has been designed for the tools delivered with the EVO, the AMB spindle and the End Mills & Collets Bundle sold by Mekanika. But will fit the majority of tools used for CNC.

Materials
300 x 150 x 20 mm - Plywood

Tools

    1) 6mm flat end mills - 3 flutes - 50mm

    2) 3mm flat end mills – 2 flutes – 38mm

Note: The origin is in the center on top of the stock. 


  1) 2D pocket - 2400mm/min - 20 000 RPM - 3mm passes

  2) 2D pocket - 1500mm/min - 20 000 RPM - 1mm passes



Download the project (Fusion360 CAD + G-code)


          LEARNINGS
      Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
                      BROWSE THE PROJECTS LIBRARY
                  Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
                  SHARE THIS POST
                  LABELS
                  No tags definied

                  Share this post
                  ​
                  Labels
                  Edit
                  CNC Milling DIY Project
                  Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
                  Our blogs